• Loading

Right Angle Gear Reducers

C70-HS Right Angle Gear Reducer

C70-HS Right Angle Gear Reducer
  • Forged Manganese Bronze Worm Gear
  • Induction Hardened, Ground and Polished Worm
  • Annealed Cast Iron Housing, Precision Machined for Accurate Shaft Alignment
  • Tapered Roller Bearings on Output Shaft
  • Ball Bearings on Input Shaft - Front and Back
  • High-Strength, Heat Treated Input and Output Shafts
  • Flange for Face-Mounting NEMA 56C Frame Motor


Output Options: Available with 3 shaft extensions (left, right or both)

Overhung load on output shaft, 850 lbs. at 1.25 in. from housing or output cap
All data is for a Service Factor of 1 at 1725 RPM input speed
Available with 8 Gear Ratios (See Chart Below)

Ratio 10 12 20 24 30 40 48 60

Download the
Brochure Here

download C70-HS Right Angle Gear Reducer broucher

Output Speed, RPM 172.5 143.7 86.25 71.87 57.5 43.13 35.94 28.75
HP Input 3.36 2.96 2.00 1.72 1.45 1.15 0.99 0.80
HP Output 3.06 2.65 1.69 1.42 1.14 0.84 0.69 0.52
Torque Out (In Lbs.) 1119 1164 1236 1243 1248 1235 1208 1138

C70-RS Right Angle Gear Reducer

C70-RS Right Angle Gear Reducer
  • Forged Manganese Bronze Worm Gear
  • Induction Hardened, Ground and Polished Worm
  • Annealed Cast Iron Housing, Precision Machined for Accurate Shaft Alignment
  • Tapered Roller Bearings on Output Shaft
  • Ball Bearings on Input Shaft - Front and Back
  • High-Strength, Heat Treated Input and Output Shafts


Output Options: Available with 3 shaft extensions (left, right or both)

Overhung load on output shaft, 850 lbs. at 1.25 in. from housing or output cap
All data is for a Service Factor of 1 at 1725 RPM input speed
Available with 8 Gear Ratios (See Chart Below)

Ratio 10 12 20 24 30 40 48 60

Download the
Brochure Here

download C70-RS Right Angle Gear Reducer broucher

Output Speed, RPM 172.5 143.7 86.25 71.87 57.5 43.13 35.94 28.75
HP Input 3.36 2.96 2.00 1.72 1.45 1.15 0.99 0.80
HP Output 3.06 2.65 1.69 1.42 1.14 0.84 0.69 0.52
Torque Out (In Lbs.) 1119 1164 1236 1243 1248 1235 1208 1138

C70-H43S Right Angle Gear Reducer

C70-H43S Right Angle Gear Reducer
  • Forged Manganese Bronze Worm Gear
  • Induction Hardened, Ground and Polished Worm
  • Annealed Cast Iron Housing, Precision Machined for Accurate Shaft Alignment
  • Tapered Roller Bearings on Output Shaft
  • Ball Bearings on Input Shaft - Front and Back
  • High-Strength, Heat Treated Input and Output Shafts
  • Flange for Face-Mounting NEMA 143 Frame Motor


Output Options: Available with 3 shaft extensions (left, right or both)

Overhung load on output shaft, 850 lbs. at 1.25 in. from housing or output cap
All data is for a Service Factor of 1 at 1725 RPM input speed
Available with 8 Gear Ratios (See Chart Below)

Ratio 10 12 20 24 30 40 48 60

Download the
Brochure Here

download C70-H43S Right Angle Gear Reducer broucher

Output Speed, RPM 172.5 143.7 86.25 71.87 57.5 43.13 35.94 28.75
HP Input 3.36 2.96 2.00 1.72 1.45 1.15 0.99 0.80
HP Output 3.06 2.65 1.69 1.42 1.14 0.84 0.69 0.52
Torque Out (In Lbs.) 1119 1164 1236 1243 1248 1235 1208 1138

C70L-GHS Right Angle Gear Reducer – Heavy Duty

C70L-GHS Right Angle Gear Reducer – Heavy Duty
  • Forged Manganese Bronze Worm Gear
  • Induction Hardened, Ground and Polished Worm
  • Annealed Cast Iron Housing, Precision Machined for Accurate Shaft Alignment
  • Tapered Roller Bearings on Output Shaft
  • Ball Bearings on Input Shaft - Front and Back
  • High-Strength, Heat Treated Input and Output Shafts
  • Larger Internal Diameter Output Shaft for Higher Overhung Load Rating
  • Flange for Face-Mounting NEMA 56C Frame Motor


Output Options: Available with 3 shaft extensions (left, right or both)

Overhung load on output shaft, 1000 lbs. at 1.25 in. from housing or output cap
All data is for a Service Factor of 1 at 1725 RPM input speed
Available with 8 Gear Ratios (See Chart Below)

Ratio 10 12 20 24 30 40 48 60

Download the
Brochure Here

download C70L-GHS Right Angle Gear Reducer – Heavy Duty broucher

Output Speed, RPM 172.5 143.7 86.25 71.87 57.5 43.13 35.94 28.75
HP Input 3.36 2.96 2.00 1.72 1.45 1.15 0.99 0.80
HP Output 3.06 2.65 1.69 1.42 1.14 0.84 0.69 0.52
Torque Out (In Lbs.) 1119 1164 1236 1243 1248 1235 1208 1138

C70L-HL Right Angle Gear Reducer

C70L-HL Right Angle Gear Reducer
  • Forged Manganese Bronze Worm Gear
  • Induction Hardened, Ground and Polished Worm
  • Annealed Cast Iron Housing, Precision Machined for Accurate Shaft Alignment
  • Tapered Roller Bearings on Output Shaft
  • Ball Bearings on Input Shaft - Front and Back
  • High-Strength, Heat Treated Input and Output Shafts
  • Extended End Bells on Output Shaft for Long Shaft Requirements and Bearing Supports
  • Flange for Face-Mounting NEMA 56C Frame Motor
  • Available Through Input Shaft for Clutch and Brake


Output Options: Available with 3 shaft extensions (left, right or both)

Overhung load on output shaft, 650 lbs. at 1.25 in. from housing or output cap
All data is for a Service Factor of 1 at 1725 RPM input speed
Available with 8 Gear Ratios (See Chart Below)

Ratio 10 12 20 24 30 40 48 60

Download the
Brochure Here

download C70L-HL Right Angle Gear Reducer broucher

Output Speed, RPM 172.5 143.7 86.25 71.87 57.5 43.13 35.94 28.75
HP Input 3.36 2.96 2.00 1.72 1.45 1.15 0.99 0.80
HP Output 3.06 2.65 1.69 1.42 1.14 0.84 0.69 0.52
Torque Out (In Lbs.) 1119 1164 1236 1243 1248 1235 1208 1138

TC43 Right Angle Gear Reducer

TC43 Right Angle Gear Reducer
  • Forged Manganese Bronze Worm Gear
  • Induction Hardened, Ground and Polished Worm
  • Annealed Cast Iron Housing, Precision Machined for Accurate Shaft Alignment
  • Tapered Roller Bearings on Output Shaft
  • Ball Bearings on Input Shaft
  • High-Strength, Heat Treated Input and Output Shafts
  • Flange for Face-Mounting NEMA 56C Frame Motor

  • Output Options:
  • Available with 3 shaft extensions (left, right or both)
  • 5/8" diameter output shaft available


Overhung load on output shaft, 400 lbs. at 1.00 in. from housing or output cap
All data is for a Service Factor of 1 at 1725 RPM input speed
Available with 8 Gear Ratios (See Chart Below)

Ratio 5.5 10 14.5 20 30 40 61 80

Download the
Brochure Here

download C70L-HL Right Angle Gear Reducer broucher

Output Speed, RPM 314 172.5 118.97 86.25 57.5 43.12 28.28 21.56
HP Input 1.31 1.14 0.90 0.69 0.47 0.42 027 0.21
HP Output 1.19 1.00 0.75 0.54 0.33 0.27 0.14 0.11
Torque Out (In Lbs.) 239 367 401 401 367 399 332 317

CE34 Right Angle Gear Reducer with DC Motor Frame

CE34 Right Angle Gear Reducer with DC Motor Frame
  • Bronze Worm Gear
  • Induction Hardened, Ground and Polished Worm
  • Aluminum Housing, Precision Machined for Accurate Shaft Alignment
  • Ball Bearings on Output Shaft
  • Ball Bearings on Input Shaft – Front and Back
  • High-Strength, Heat Treated Input and Output Shafts
  • Flange for Face-Mounting DC Frame Motor

Output Options: Available with 3 shaft extensions (left, right or both)

All data is for a Service Factor of 1 at 3000 RPM input speed Available with 5 Gear Ratios (See Chart Below)

Ratio 8 14.5 20 40 60

Download the
Brochure Here

download CE34 Right Angle Gear Reducer with DC Motor Frame broucher

Output Speed, RPM 375 206.9 150 75 50
HP Input 0.96 0.67 0.44 0.25 0.14
HP Output 0.89 0.58 0.37 0.18 0.09
Torque Out (In Lbs.) 149 177 153 153 114
Overhung Load, Output
at 2 in. from housing (Lbs.)
36 53 64 92 110

L60 Right Angle Gear Reducer

L60 Right Angle Gear Reducer
  • Forged Manganese Bronze Worm Gear
  • Induction Hardened, Ground and Polished Worm
  • Annealed Cast Iron Housing, Precision Machined for Accurate Shaft Alignment
  • Tapered Roller Bearings on Output Shaft
  • Ball Bearings on Input Shaft – Front and Back
  • High-Strength, Heat Treated Input and Output Shafts

Output Options: Available with 3 shaft extensions (left, right or both)

Overhung load on output shaft, 400 lbs. at 1.00 in. from housing or output cap All data is for a Service Factor of 1 at 1725 RPM input speed Available with 7 Gear Ratios (See Chart Below)

Ratio 5.5 10 14.5 20 30 40 61

Download the
Brochure Here

L60 Right Angle Gear Reducer

Output Speed, RPM 314 172.5 118.97 86.25 57.5 43.12 28.28
HP Input 1.31 1.14 0.90 0.69 0.47 0.42 0.27
HP Output 1.19 1.00 0.75 0.54 0.33 0.27 0.14
Torque Out (In Lbs.) 239 367 401 401 367 399 332

TC43I Right Angle Gear Reducer with DC Motor Frame

TC43I Right Angle Gear Reducer with DC Motor Frame
  • Bronze Worm Gear
  • Induction Hardened, Ground and Polished Worm
  • Annealed Cast Iron Housing, Precision Machined for Accurate Shaft Alignment
  • Tapered Roller Bearings on Output Shaft
  • Ball Bearings on Input Shaft
  • High-Strength, Heat Treated Input and Output Shafts
  • Flange for Face-Mounting DC Frame Motor

Output Options: Available with 3 shaft extensions (left, right or both)

Overhung load on output shaft, 400 lbs. at 1.00 in. from housing or output cap All data is for a Service Factor of 1 at 1725 RPM input speed Available with 7 Gear Ratios (See Chart Below)

Ratio 5.5 10 14.5 20 30 40 61

Download the
Brochure Here

TC43I Right Angle Gear Reducer with DC Motor Frame

Output Speed, RPM 314 172.5 118.97 86.25 57.5 43.12 28.28
HP Input 1.31 1.14 0.90 0.69 0.47 0.42 0.27
HP Output 1.19 1.00 0.75 0.54 0.33 0.27 0.14
Torque Out (In Lbs.) 239 367 401 401 367 399 332
bluffton motor worksrae dc products group Toledao Gearmotor